Fall 2010: Open enrollment will be held from Monday, June 21, through Monday, August 2, 2010.
Air Conditioning and Refrigeration I
Boilers
Electricity & Electric Motor Controls I
Fire Alarm Systems I
EPA Technician Certification Preparation, Review and Exam *
EPA Technician Certification Review and Exam *
Fire Alarm Systems I
Schematic Reading & Troubleshooting I NEW 18-Week Course
*Certification class
|
|
|
|
4-Weeks, 2 Sessions Per Week, 8 Hours Per Session, 56 Hours Total. Prerequisite: None. This course provides instruction on backflow prevention theory, cross connection control laws, and backflow prevention asemblies. Assembly mechanics, design, installation, testing, and maintenance will be disucssed. A certification exam will be administered by the California-Nevada section of the AWWA at the conclusion of this course. Cost for the examination is included in the registration fee. Code 026. Certification is valid for three years.
Back to Top
|
 |
|
|
7-Weeks, 8 Hours Per Session, 56 Hours Total. Prerequisite: Current Backflow Prevention Assembly Tester Certificate. Students will learn how to check multi-piping drawings for cross-connections, conduct cross-connection surveys, use proper record keeping procedures and implement cross-connection programs and ordinances. A certification exam will be administered by the California-Nevada section of the AWWA at the conclusion of this course. Cost for the examination is included in the registration fee. Certification is valid for three years.
Back to Top
|
|
|
|
|
|
18-Weeks, 3 Hours Per Session, 56 Hours Total. Prerequisite: None. This course will provide training on basic blue print drawing terminology and review prints used in the construction and maintenance of buildings. Design issues and techniques will be discussed along with historical perspectives, code issues, and technology changes in the building construction process.
Back to Top
|
|
|
18-Weeks, 3 Hours Per Session, 54 Hours Total. Textbook Included. Prerequisite: None. This class class covers the basic operation of low and high-pressure boilers. Students will learn how to determine boiler types and styles, water treatment chemistry and troubleshooting. Field trips may be required as part of this course.
F10SA030A, Saturday, 08/28/10, 9:00am-12:00pm, NO LONGER AVAILABLE.
F10SA030B, Monday, 08/23/10, 5:30pm-8:30pm, NO LONGER AVAILABLE.
Back to Top
|
|
|
|
18-Weeks, 3 Hours Per Session, 54 Hours Total. Prerequisite: None. This course will provide a basic description of the electrical distribution, life safety, steam, HVAC, domestic water, plumbing and mechanical systems that can be found in a typical facility
Back to Top
|
|
|
|
1 Session, 8 Hours Total. This class provides training in accordance with OSHA regulations that provides a basis for the safe entry and work within confined spaces, hazard identification, and the use of specialized equipment to ensure worker safety and healthy. Class size is limited to no more than 12 students for quality instruction, so register early!
Back to Top
|
|
|
|
18-Weeks, 3 Hours Per Session, 54 Hours Total. Textbook Included. Prerequisite: Controls I. The course is designed as a continuation of Controls I for the Stationary Engineer. The student will further develop the ability to understand various types of commercial and industrial control systems, siring diagrams and ladder diagrams. Theis segment of the course will also incorporate pneumatic control fundamentals.
Back to Top
|
|
|
| 18-Weeks, 3 Hours Per Session, 54 Hours Total. Textbook Included. Prerequisite: Controls I. The student will further develop the ability to understand various types of commercial control systems, wiring diagrams, and ladder diagrams. Pneumatic fundamentals along with Proportional Intregal Derivative (P.I.D.) theory, applications, and troubleshooting will also be discussed.
Back to Top
|
|
|
|
18-Weeks, 3 Hours Per Session, 54 Hours Total. Textbook Included. Prerequisite: An understanding of basic math. This class will explore direct current, alternating current, resistance, magnetism, inductance and capacitance. Students will acquire a broad knowledge of single phase and three phase generation and distribution. Through hands-on projects, students will learn how to properly use a meter to troubleshoot circuits.
Back to Top
|
|
|
|
18-Weeks, 3 Hours Per Session, 54 Hours Total. Textbook Not Included. Prerequisite: Electricity I. Students will explore the theory and operation of auxiliary generator systems. This course will cover the concepts and operation of single and three phase motors. Emphasis will be placed on single and three phase distribution in facilities.
Back to Top
|
 |
|
18-Weeks, 3 Hours Per Session, 54 Hours Total. Textbook Included. Prerequisite: None. The student will gain an understanding of the electrical concepts needed by a Stationary Engineer on topics such as alternating current, direct current and single phase and three phase generation, transformers, and distribution. Also discussed will be inductive, capacitive and resistive cirecuits, along with power factor and power factor correction. The student will also learn various types of electrical controls used in motor control systems and will gain the ability to construct and analyze wiring and ladder diagrams used in motor control circuits. Through hands-on projects students will learn how to use a meter and how to troubleshoot motor control circuits.
Back to Top
|
|
|
|
18-Weeks, 3 Hours Per Session, 54 Hours Total. Textbook Not Included. Prerequisite: Electricity & Electric Motor Controls I. The student will continue to gain an understanding of the electrical concepts needed by a Stationary Engineer in single phase and three phase generation, transformation, and distribution. The student will also learn various types of electric and pneumatic controls used in building control and motor control systems and will gain the ability to construct and analyze wiring and ladder diagrams used in these types of control circuits. Automatic transfer switches, fire pump start and stop controls, and air compressors are just a few of the circuits that will be analyzed and discussed. Code 316.
Back to Top
|
| EPA TECHNICIAN CERTIFICATION PREPARATION, REVIEW AND EXAM * |
|
 |
|
1 Session, 8 Hours Total. Textbook Included. Prerequisite: A basic understanding of air conditioning systems. This course is recommended for those who have not previously taken the EPA exam. This eight-hour class will provide six hours of review for the CFC/EPA Certification Exam and a two-hour CFC/EPA Universal testing period. Topics include refrigeration, charging, transportation, recycling, and recovery of chlorofluorocarbons. The EPA requirements covered in this review prepare the student for all levels of certification, (Type I, Type II, Type III and Universal). Course formally known as CFC Preparation, Review and Exam.
Back to Top
|
| EPA TECHNICIAN CERTIFICATION REVIEW AND EXAM * |
 |
 |
1 Session, 4 Hours Total. Textbook NOT Included. Prerequisite: A basic understanding of air conditioning systems. This four hour class is designed specifically for students who have already taken the Preparation, Review and Exam class. The class includes a review for the CFC/EPA Certification Exam and a two-hour CFC/EPA Universal testing period. The EPA requirements covered in the review prepare the student for all levels of certification, (Type I, Type II, Type III and Universal). Course formally known as CFC Review and Exam.
Back to Top
|
FIRE ALARM SYSTEMS, BASIC EXTENDED HOURS
|
 |
|
|
18-Weeks, 3 Hours Per Session, 54 Hours Total. Textbook Included. Prerequisite: None. This course presents an in-depth overview of Fire Alarm Systems and explores topics such as components of a fire system, wiring requirements, benefits of Class A and Class B wiring techniques, and the three distinct types of fire system signals (alarm, supervisory, and trouble). Students will gain an understanding of maintenance and testing requirements for a fire alarm/suppression system, and will also learn about primary vs. secondary power for fire alarm systems, zone module applications, proper installation of wiring and devices, and how smoke detectors and sensors work.
Back to Top
|
FIRE SUPPRESSION SYSTEMS
|
|
|
|
18-Weeks, 3 Hours Per Session, 54 Hours Total. Textbook Included. Prerequisite: None. This course presents an in-depth overview of Fire Alarm Systmes and explores topics such as components of a fire system, wiring requirements, benefits of Class A and Class B wiring techniques, and the three distinct types of fire system signals (alarm, supervisory, and trouble). Students will gain an understanding of maintenance and testing requirements for a fire alarm/suppression system, and will also learn about primary vs. secondary power for fire alarm systems, zone module applications, propert installation of wiring and devices, and how smoke detectors and sensors work.
Back to Top
|
|
|
|
18-Weeks, 3 Hours Per Session, 54 Hours Total. Textbook Included. Prerequisite: None. Students receive Hazwoper certification in HAZCOM, MSDS, industrial hygiene, toxicology, bloodborne pathogens, and air monitoring. Students will also receive certification in respiratory protection, personal protective equipment, site control zones, confined space, site emergencies, drum handling, medical surveillance. Government regulations, employee rights and employer responsibilities will also be addressed. First aid and CPR are also included. Students will receive a certification card from the American Red Cross. Code 025. IUOE Certification is valid for one year.
Back to Top
|
|
|
3-Weeks, 8 Hours Per Session, 24 Hours Total. Textbook Included. Prerequisite: None. After completing this course the student should be able to understand the methods used to detect the presence or release of any hazardous chemicals or substances that they may encounter. The student will also understand the types of physical and health hazards posed by any chemicals or substances that they may come across. Additionally the different ways to protect the workers from exposure to chemicals such as work practices, protective equipment and emergency procedures will be explored. The IUOE renewal is valid for one year.
Back to Top
|
HAZARDOUS MATERIALS (HAZWOPER) REFRESHER *
|
|
|
1 Session, 8 Hours Total. Textbook Included. Prerequisite: Current Hazardous Materials Certification. (40 hour, 24 hour or 8 hour.) An annual update addressing required elements within the HAZWOPER Standards, new equipment, technologies, and methodologies that have evolved that are essential for HAZWOPER site workers to retain their certification The IUOE renewal is valid for one year.
Back to Top
|
HIGH RISE FIRE SAFETY DIRECTOR *
|
|
|
7-Weeks, 4 Hours Per Session, 28 Hours Total. Textbook Included. Prerequisite: None. This class provides instruction in facility emergency plans, fire prevention, life safety systems, evacuations, relocation procedsures, earthquake preparedness and emergency management. A facility emergency plan or term paper is required for successful completion of this course. The High Rise Fire Safety Director Certification is valid for 5 years. Students who successfully pass this course will receive 1.5 units through City College of San Francisco. Code 023.
Back to Top
|
HIGH RISE FIRE SAFETY DIRECTOR RENEWAL
|
|
|
1 Session, 3 Hours Total. Textbook Included. Prerequisite: Registrant must possess a valid* Fire Safety Director Certificate: A copy of your valid certificate must be submitted with your registration form. This class provides an overview of current federal, state and local laws, codes and policies as well as an overview of the responsibilities of a High Rise Fire Safety Director. This class includes a question and answer session and suggestions on how to handle specific issues at your facility. Code 123. *You are eligible to renew if your current certificates date does not exceed 5 years. The certificate renewal is valid for 5 years
Back to Top
|
HVAC CONTROL SYSTEMS
|
|
|
18-Weeks, 3 Hours Per Session, 54 Hours Total. Textbook Included. Prerequisite: Controls I. HVAC = Heating, Ventilation and Air Conditioning. This course furthers the students understanding of building automation including various types of commercial control, and the schematics and ladder diagrams used for these systems. Pneumatic and electronic control systems are discussed as well as the input and output devices for these systems. Types and purposes of controllers, operator interfaces, networking fundamentals, control strategies, proportional integral derivative (P.I.D.), and building automation system troubleshooting techniques will be covered.
Back to Top
|
INDOOR AIR QUALITY *
|
|
|
18-Weeks, 3 Hours Per Session, 75 Hours Total. Textbook Included. Prerequisite: None. Students who complete this course will receive certification in Indoor Air Quality from the IUOE. Course topics include preventative maintenance systems, record keeping, HVAC systems, permissible limits, investigation procedures and the process for dealing with indoor air quality issues. Total hours are comprised of 54 hours of class lecture and 21 hours of related supplemental training.
Back to Top
|
|
|
|
18-Weeks, 3 Hours Per Session, 54 Hours Total. Textbook and a Complete Pinning Kit Included. Prerequisite: None. Students will study and discuss topics such as locksmithing tools and supplies used in the industry, pins, key duplicating, cylinders, lock picks, pick guns, master keying and more. Students will also learn how to fit keys by impression and by reading locks.
Back to Top
|
|
|
|
18-Weeks, 3 Hours Per Session, 54 Hours Total. Prerequisite: Basic understanding of Locksmithing. This course will cover the installation of different types of locksets and door closers as well as how to do the different types of adjustments on them. Troubleshooting techniques about the different types of problems that can arise from a bad installation will be discussed. Code 121.
Back to Top
|
MACHINERY
|
|
|
|
18-Weeks, 3 Hours Per Session, 54 Hours Total. Textbook Included. Prerequisite: None. This course will provide the student with knowledge of mechanical systems and machines commonly operated and maintained by Stationary Engineers. It's designed to give a working knowledge of basic skills expected in the industry. Some of the topics of discussion will be bearings, belt drives, coupling and shaft alignment, compressors and pneumatics, pumps and seals, valves and piping, fasteners, basic rigging and safety. Code 066.
Back to Top
|
PLUMBING
|
|
|
|
9-Weeks, 3 Hours Per Session, 27 Hours Total. Textbook Included. Prerequisite: None. In this course students will review job site safety as it pertains to working with plumbing systems. Additional topics will include plumbing materials, plumbing tools and equipment, sanitary drainage, storm water drainage piping, and sizing water supply piping. Students will learn by implementing hands-on techniques, the proper methods of how to solder, braze, and thread piping. The differences between black iron, copper, galvanized, and plastic pipe and fittings will also be reviewed. Code 160.
Back to Top
|
SCHEMATIC READING NEW 9-WEEK COURSE
|
|
|
|
9-Weeks, 3 Hours Per Session, 27 Hours Total. Prerequisite: None. The goal of this class is to upgrade the skill level of the student in the process of comprehending and reading schematic diagrams. The class is divided into three (3) sections: a) introduction on how to read schematics as well as a look into basic motor control diagrams. b) understanding kitchen appliance schematics. c) interpreting HVAC schematics. Note: There will be no hands-on training in this class, strictly schematic reading. Code 017.
Back to Top
|
SCHEMATIC READING & TROUBLESHOOTING NEW 18-Week Course
|
|
|
|
18-Weeks, 3 Hours Per Session, 54 Hours Total. Textbook Included. Prerequisite: None. This course includes hands-on and more in depth traning than our 9-week course. The goal of this class is to upgrade the skill level of the student in the process of comprehending and reading schematic diagrams. The class is divided into three (3) sections: a) introduction on how to read schematics as well as a look into basic motor control diagrams. b) understanding kitchen appliance schematics. c) interpreting HVAC schematics.
Back to Top
|
|
|
|
18-weeks, 3 Hours Per Session, 54 Hours Total. Textbook included. Prerequisite: None. This course will assist the student to prepare for the next upcoming Waste Water Plant Operator Exam. This class will follow the Sacramento State College (Ken Kerri) course format. An objective test will be given for each chapter covered. A minimum grade point average of 70% must be maintained at the end of the course to receive 4.7 continuing education units from the Local 39 Training Department.
Back to Top
|
